Fuel injection Throttle body. Type TA, 40 - 50mm bore

The type TA body is designed to fit the same flanges as twin downdraft carburettors from Weber (IDA) It is a compact body, well suited for use on 'V' engines with their tendency to long inlet tracts and shortage of space.
All sizes are fitted with idle bypass adjustment and 'starter holes' for vacuum sensors - usefull for idle setup.
Steel fuel rails with -6 threaded ends, 'O' rings, throttle pot clamp and other fittings are supplied with all kits.
Operating data; Spindle rotation: 82 degrees. Torque per spindle at WOT: 300 - 340 N-mm which gives a tangential pull of 8 - 9 N on long arm of standard lever. Option of 115 N-mm springs available.
Other items; Quadrant throttle mechanism, 'V' engine linkage kits (including central rocker), range of air horns (bellmouths, trumpets, stacks), throttle potentiometers.