Hi-Torque Electronic Actuator with operating wheel

The Jenvey ETA4 Motorsport electronic throttle actuator has been created specifically for use with motorsport and high-performance engines. It will operate Jenvey individual throttle systems as well as other applications requiring fast and accurate response within its operating range.

All major components, with the exception of the high-performance DC motor, have been designed, developed and manufactured at the Jenvey Dynamics headquarters in the UK. Prototype tests have exceeded 1,000,000 cycles of normal operation without failure.

The throttle actuator ETA4 consists of a DC Motor with carbon fibre reduction gearing and is available with a large range of actuating levers and return springs. It can be driven in either direction and includes adjustable end stops. An adjustable limp home spring module is available

This actuator has been designed to mainly run on 6 and 8 cylinder engines.

• Rotation: Maximum 100 degrees, clockwise or anti-clockwise.

• Electrical connector (throttle position): TP1 and TP8 supplied with AMP Econoseal connector

• Throttle position sensor: TP1, TP8 or any to fit an 8mm shaft with a 6mm flat

• Limp home: adjustable to suit application in clockwise or anti-clockwise actuation

• Expected time: 0 to 100% (stable) < 0.08s as tested on 4 single SF bodies (soft springs

• Max current:  8 amps
• Max torque: 5400Nmm
• Max continuous (holding) current: <2A
• Mount orientation:  Any
• Unit weight:  600 grams

• SKU: ETA4
• Weight: 0.58 KG